CyberData 011035 Specifikace stáhnout pdf (Strana 28)

Installing the VoIP Emergency Intercom

Restore the Factory Default Settings

Operations Guide 930279W CyberData Corporation

2.2.8 Restore the Factory Default Settings

When troubleshooting configuration problems, it is sometimes convenient to restore the device to a

known state. To restore the factory default settings on your device, do one of the following:

• If you have an Intercom that has an RTFM button, then see Section 2.2.8.1, "Intercom with an

RTFM Button".

• If you have an Intercom that has a jumper and does not have an RTFM button, then see Section

2.2.8.2, "Intercom with a Jumper".

Note Each Intercom is delivered with factory set default values.

Note The device will use DHCP to obtain the new IP address (DHCP-assigned address or default

to 10.10.10.10 if a DHCP server is not present).

2.2.8.1 Intercom with an RTFM Button

Complete the following steps to restore defaults on an Intercom that has an RTFM button:

1. Press and hold the RTFM button (Figure 2-12) until the Intercom announces the IP address.

Figure 2-12. RTFM Button

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 90 91

Žádné komentáře

CyberData 011035 Specifikace Strana 28