CyberData 011123x Specifikace Strana 23

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 86
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 22
Operations Guide 930370M CyberData Corporation
16
Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)
Parts List
2.2.6 RTFM Button
When the Intercom is operational and linked to the network, use the Reset Test Function
Management (RTFM) button (see SW1 in
Figure 2-8) on the Intercom board to announce and
confirm the Intercom’s IP Address and test that the audio is working.
Note You must do this test prior to final assembly.
Figure 2-8. RTFM Button
2.2.6.1 Announcing the IP Address
To announce a device’s current IP address:
1. Press and release the RTFM button (SW1) within a five second window.
Note The device will use DHCP to obtain the new IP address (DHCP-assigned address or default
to 10.10.10.10 if a DHCP server is not present).
Note Pressing and holding the RTFM button for longer than five seconds will restore the device to
the factory default settings.
RTFM
Zobrazit stránku 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

Komentáře k této Příručce

Žádné komentáře